Mould Waterway Cleaning Machine

Mould Waterway Cleaning Machine: for plastic molds, die-casting molds, waterways, waterway scale cleaning. equipment capabilities:Cleaning process: 30-120 minutes. Cleaning process:High-pressure pulse

关闭
产品咨询
产品热线:+86 13764369164

Mould Waterway Cleaning Machine: for plastic molds, die-casting molds, waterways, waterway scale cleaning.

 

equipment capabilities:

Cleaning process: 30-120 minutes.

 

Cleaning process:

High-pressure pulse acid cleaning, city water cycle cleaning, compressed air drying.

 

The main technical requirements of the equipment:

Structure composition

This cleaning device is mainly composed of tank cleaning main body, Taiwan Wei Lun 7-inch touch screen control system, Mitsubishi PLC control system, flow meter, pulse electromagnetic valve, pneumatic valve, stainless steel pipeline, high pressure spray system, compressed air bubble system, electrical Control and other components. The acid cleaning and city water cleaning are automatically switched for cleaning, automatic water intake and automatic drainage. The working mode is displayed on the touch screen in dynamic mode. And there are flow display and pressure display.

 

Device Description

The washing machine is a continuous operation device composed of a manual operation, controlled by a relay, two cleaning tanks made of stainless steel tanks, an acid acid cleaning tank, and an weak alkaline cleaning tank (rustproof tank). The entire process is the use of artificial take over, the mold followed by weak acid cleaning, spray cleaning, rust prevention followed by the next process compressed air drying.

 

Equipment main technical requirements:

First tank: Aqueous acid (weak acid) cleaning tank.

A. Inner tank size: 300x300x450 (LxWxH mm), the tank body is made of 2.mm thick 316 material.

B. High-pressure circulating pump power: 2.2 KW (weak acid resistance, weak alkali resistance). South pump.

C. stainless steel level switch.

D. Stainless steel cartridge filter.

E. 1 inch inlet valve, drain valve. Check valve.

F. Exhaust pipe, 8 pulse output pipes.

G. Output Waterway: Six out of four. A total of 12 roads.

 

Second tank: clean water tank (anti-rust tank).

A. Inner groove size: 300x300x450 (LxWxH mm), the tank body is made of 2.0mm thick 316 material.

B. Cleansing liquid: city water

C. Pulsed water rinse.

E. The cleaning tank has a water inlet, an overflow port, and a liquid outlet.

F. There is a bag filter.

G. Level control switch.

 

The clean water tank cleaning tank acts as a washing liquid remaining on the mold, neutralizes neutralization of the acidic cleaning agent, and prevents corrosion of the mold.

 

rack section

The whole machine is made of SUS316 stainless steel, and the outer sealing plate and frame are made of stainless steel 316 material.

                                      

Control System

A. The relay controls the entire operation process.

B. With a timer, you can adjust freely according to the beat.

D. Emergency stop button, switch button and alarm device are installed at each end of the equipment.

E. All systems have their status displayed on the operation panel.

F. With independent distribution box, the circuit is divided into functional blocks, strong electricity, and weak electricity to facilitate maintenance.

G. Contactors, relays, and air-openings all use the German Schneider branded products.

 

The main technical parameters of the equipment (specific parameters based on the final design):

A. The whole tank is made of SUS316 2.0mm, the frame is made of sus304 2.0mm stainless steel square pass, and the outer door is made of sus316 1.0mm wire drawing board.

B. Mainframe size: about 1600mmx600mmx860m (cylinder head is portable).

E. The machine rated power: about 2.5KW.

F. All piping is made of stainless steel.

G. Power supply: 380V AC 50HZ.



Telephone
Product
Quote